DGSI Slope Indicator
Home Products Downloads Support Contacts Projects News

Monitoring Renovation of a Structure

Globe Theatre London, England: William Shakespeare's plays were first performed at the Globe theater some 400 years ago. The original Globe was destroyed by fire and when it was rebuilt, William Shakespeare became a partner in the theatre company as well as its most famous playwrite. Closed by the Puritans in 1642, the Globe was eventually torn down and lost to history.

A replica of the Globe was completed in 1994 by the Shakespeare Globe Playhouse Trust. This organization secured property only 200 meters from original site and reconstructed the theatre from sketches and other records, including recently discovered remains of the foundations of the theatre. Traditional techniques and material were used in the reconstruction, except for a sheet of fireproof material embedded in the walls between layers of plaster. Of course, modern ground improvements were necessary, and these included construction of a 300 meter-long diaphragm wall between the property and the Thames river.

Wall with beam sensorsAs the theatre itself neared completion, work began on an adjoining visitors center and a series of shops. In London, as in other mature cities, any new construction almost always affects neighboring buildings, and city ordinances mandate that adjacent structures be monitored for damage due to the construction activity. In this case, a tall brick wall, about 10 meters high and 60 meters long, had to be monitored for rotation and deformation as a supporting structure was removed and another built in its place.

Brick wall with beam sensorsTwenty vertical EL beam sensors , in five separate strings, were installed on the wall in five separate strings. Readings were recorded by a CR10 data logger and retrieved by a laptop computer at five minute intervals. The computer ran the RealMon program which displayed the profile of each string in near-real time.

Real-Time Deformation MonitoringRealMon, the DOS predecessor to MultiMon , was set to trigger an alarm if rotation or deformation exceeded 0.8 mm. String 1 in the RealMon plot at left shows an alarm condition. However, the visitor's center was completed successfully without incident.

Thanks to Dr. Hai Tien Yu for providing this story.

 

 

 

Project List

DGSI Information